Meadows Mills, Inc., Mill manufacturers since 1902

Home Contents What's New Products & Services Feedback   About Us Contact Us

Meadows 4" Board Edgers

Meadows 4" Board Edgers are available in handset or hydraulic models.  The hydraulic edgers are available with manual valves or electric valves with push button controls.  Our 4" edgers are available in 30" and 36" widths.  The chart below provides a quick reference of the features on each of our 4" edgers.  If you have further questions or wish to inquire about prices please contact Bob, Brian, or Robert at 1-800-626-2282 or 336-838-2282.

Meadows 4" Standard Edgers Meadows 4" Deluxe Edgers Meadows 4" Titan Edgers
Frame Construction
  • 6" steel channel side rails with welded tubular cross members
  • 20' length with standard 8' infeed and 8' outfeed
  • 30" or 36" width
  • 2 pairs of legs constructed from 6" channel
Frame Construction:
  • 6" steel channel side rails with welded tubular cross members
  • 20' length with standard 8' infeed and 8' outfeed
  • 30" or 36" width
  • 2 pairs of legs constructed from 6" channel
Frame Construction
  • 8" steel channel reinforced with 6" channel cross members
  • 20' length with standard infeed and outfeed
  • Hood assembly with 3/8" side plates and 1/4" top doors
  • 36" width only
  • 2 pairs of legs constructed from 6" channel
Mandrel:  
  • 2 3/16" diameter high carbon turned, ground and polished steel with two 1/2" keys
  • Two 1 11/16" pillow block bearings
Mandrel:  
  • 2 15/16" diameter high carbon turned, ground and polished steel with two 1/2" keys
  • Two 2 3/16" pillow block bearings
Mandrel:  
  • 2 15/16" diameter high carbon turned, ground and  polished steel with two 1/2" keys
  • Two 2 3/16" pillow block bearings
Feed Rolls and Press Rolls:  
  • Two 2 3/16" diameter corrugated infeed and two 2 3/16" corrugated outfeed bottom rolls connected by a roller chain drive
  • Double v-belt feed from mandrel to feed pulley
  • 1 11/16" pillow block bearings
  • Two 5 1/2" diameter overhead press rolls
  • Complete set of anti-kickback fingers with release handle
Feed Rolls and Press Rolls:  
  • Two 2 15/16" diameter corrugated infeed and two 2 15/16" diameter outfeed bottom rolls connected by a roller chain drive
  • Double v-belt feed from mandrel to feed pulley
  • Optional variable speed hydraulic feed
  • 1 11/16" pillow block bearings
  • Two 5 1/2" diameter overhead press rolls
  • Complete set of anti-kickback fingers with release handle
Feed Rolls and Press Rolls:  
  • Two 2 15/16" diameter corrugated infeed and two 2 15/16" diameter outfeed bottom rolls connected by a roller chain drive
  • Double v-belt feed from mandrel to feed pulley
  • Optional variable speed hydraulic feed
  • 1 11/16" pillow block bearings
  • Two 5 1/2" diameter overhead press rolls
  • Complete set of anti-kickback fingers with release handle

 

Rate of Feed:  
  • 129 feet per minute at 2000 RPM for handset models
Rate of Feed:  
  • 129 feet per minute at 2000 RPM for handset models
  • Variable for hydraulic models
Rate of Feed:  
  • 129 feet per minute at 2000 RPM for handset models 
  • Variable for hydraulic models
Saws:  
  • 16" inserted tooth saw, 8 gauge with 14 teeth, 9/32" kerf, 3 1/4" eye with three 9/16" pin holes on a 4" circle
  • 16" split carbide saws, 10 gauge with 18 teeth, 0.204" kerf

 

Saws:
  • 16" inserted tooth saw, 8 gauge with 14 teeth, 9/32" kerf, 3 1/4" eye with three 9/16" pin holes on a 4" circle
  • 16" split carbide saws, 10 gauge with 18 teeth, 0.204" kerf

 

Saws:  
  • 16" inserted tooth saw, 8 gauge with 14 teeth, 9/32" kerf, 3 1/4" eye with three 9/16" pin holes on a 4" circle
  • 16" split carbide saws, 10 gauge with 18 teeth, 0.204" kerf
Capacity:  
  • Width capacity for 30" Edger  is 30 3/4", and for a 36" edger is 35 3/4", 
  • Cut depth from 1" to 4 1/2"
Capacity:  
  • Width capacity for 30" Edger  is 30 3/4", and for a 36" edger is 35 3/4", 
  • Cut depth from 1" to 4 1/2"
Capacity:  
  • Width capacity varies based on configuration
  • Cut depth from 1" to 4"
Mandrel Speed Recommended:  
  • 2000 to 2400 RPM
Mandrel Speed Recommended:  
  • 2000 to 2400 RPM
Mandrel Speed Recommended:  
  • 2000 to 2400 RPM
Power Required:
  • Generally 30-hp to 50-hp, however, horsepower requirements may vary with saw configurations and thickness of material to be edged
Power Required:  
  • Generally 30-hp to 50-hp, however, horsepower requirements may vary with saw configurations and thickness of material to be edged

     

Power Required:
  • Generally 30-hp to 50-hp, however, horsepower requirements may vary with saw configurations and thickness of material to be edged

     

Optional Equipment:  
  • Hydraulic saw shift
  • Variable speed hydraulic feed
  • Laser lights
  • Wheel mounting
  • Movable fence
  • Saw dust blower
  • Electric motor, starter, and v-belt drive
Optional Equipment:  
  • Hydraulic saw shift
  • Variable speed hydraulic feed
  • Laser lights
  • Wheel mounting
  • Movable fence
  • Saw dust blower
  • Live outfeed rolls
  • Tailing device, standard 16' x 5" driven from the edger
  • Electric motor, starter, and v-belt drive
Optional Equipment:  
  • Hydraulic saw shift
  • Variable speed hydraulic feed
  • Laser lights
  • Movable fence
  • Saw dust blower
  • Live outfeed rolls
  • Tailing device, standard 16' x 5" driven from the edger
  • Electric motor, starter, and v-belt drive

 Meadows Combination Edgers | Meadows Vertical Edgers | Miner Edgers

 

Click Here to view our new listing of New & Used Sawmill & Related Equipment for sale and ready for immediate delivery

 

Prices subject to change without notice.

Home Contents What's New Products & Services Feedback Contact Us
Send mail to sales@meadowsmills.com with questions or comments about this web site.
Copyright 1997-2010,  Meadows Mills, Inc., All rights reserved
Meadows Mills, Inc.
PO Box 1288
1352 West D Street
North Wilkesboro, NC 28659
Toll Free 1- 800-626-2282
Telephone 336-838-2282
Fax 336-667-6501
Last modified: February 03, 2012