Call Us Toll Free! 800-626-2282    

Trade Ins

Crosby 32 x 4 Board Edger

$4,950

We are selling a good condition, used Crosby Size 32 (by 4 Inch) board edger. The serial number is 2556T. The edger has the following features: • One stationary saw collar • One lever shifting saw collar (guide pin shift) with scale for lumber • One moveable fence that is positioned on the left side (when looking from infeed towards the outfeed) of the edger • One 2 3/16 inches diameter mandrel with bearings • Four (4) powered (belt) bottom feed rolls (approximately 3 inches diameter) and two (2) overhead pressure rolls (approximately 4 inches diameter) • Infeed table with three 4 inches diameter rollers mounted with pillow block bearings • Outfeed table (detached) with three 4 inches diameter rollers mounted with pillow block bearings

Lincoln TEFC 75HP Electric Motor

$1,500

For sale, one (1) Lincoln 75HP electric motor, 1775RPM, 230/460 volt, 365T frame. New bearings and new shaft. You can pick up in North Wilkesboro, NC or we can arrange for shipment to you. If you’re interested please call Brian Hege at 336-927-4663.

1999 Meadows Mills 30 Inch Heritage Stone Burr Mill

$12,625

For sale, one (1) factory reconditioned 30 inch stone burr mill with material handling fan. This stone burr mill is belt driven by a 25 HP 3 phase 60 hertz electric motor and includes the belt drive with belt guard, material handling fan belt driven from the stone burr mill, material collector with filter bag dust collection system, and pipe to connect material handling fan to material collector. Magnetic motor starter available for additional cost. You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

2005 Meadows Mills 30 Inch Heritage Stone Burr Mill

$13,125

For sale, one (1) factory reconditioned 30 inch stone burr mill with material handling fan. This stone burr mill is belt driven by a 40 HP 3 phase 60 hertz electric motor and includes the belt drive with belt guard, material handling fan belt driven from the stone burr mill, material collector with filter bag dust collection system, and pipe to connect material handling fan to material collector. Magnetic motor starter available for additional cost. You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

2012 Meadows Mills Hand Bagger

$750

Used Meadows hand bagger, serial number HB-0081-12U.

Meadows Mills 20 Inch Stone Burr Mill

$4,200

For sale, one (1) used 20 inch stone burr mill, side discharge. This stone burr mill includes a side sifter and a drive pulley for a flat belt. The millstones have been dressed. You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

Meadows Mills Hand Truck

$125

For sale, one (1) antique hand truck. Includes original wood and metal components. You can pick up the hand truck in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

Meadows Mills 16 Inch Meadows

$6,500

For sale, one (1) fully restored 16 inch Williams stone burr mill, side discharge, with side sifter. This mill features new wood, sandblasted metal parts, fully dressed millstones, and new Babbitt bearings. You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

Meadows Mills Sprout Waldron

$2,500

For sale, one (1) fully restored 12 inch Sprout Waldron stone burr mill, side discharge, with side sifter. This mill features new wooden sills, sandblasted metal parts, fully dressed millstones, and good bearings. You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

Meadows Mills 20 Inch Williams

$2,000

For sale, one (1) as-is 20 inch Williams stone burr mill, side discharge, with side sifter. This mill features original wood and metal components. Millstones are in good condition. Let us restore this mill for you! You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

Meadows Mills 24 Inch Mealmaster

$7,500

For sale, one (1) factory reconditioned 24 inch stone burr mill with material handling fan. This stone burr mill is belt driven by a 15 HP 3 phase 60 hertz electric motor and includes the belt drive with belt guard, and material handling fan belt driven from the stone burr mill. Magnetic motor starter available for additional cost. You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

2013 Meadows Mills Model 5

$5,950

For sale, one (1) Meadows model 5 hammer mill, direct driven by a 10 HP 3 phase 3,450 rpm electric motor. The hammer mill includes a material handling fan driven from the main shaft, 4 inches diameter pipe connecting the fan to the collector, the collector, and the filter bag dust collection system. Magnetic motor starter available for additional cost. You can pick up the hammer mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

2017 Meadows Mills Grits Separator

$8,950

For sale, one (1) reconditioned Meadows grits separator, bottom discharge. This unit is belt driven by a 3 HP 3 phase electric motor. Magnetic motor starter available for additional cost. You can pick up the grits separator in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

2004 Meadows Mills Assembly A

$2,000

For sale, one factory reconditioned 2004 model Meadows 8 inch stone burr mill, the assembly A. This mill is belt driven by a 1 HP single phase 120 volt electric motor. The wooden base, belt drive with guard, electric motor, and on/off switch with power cord is included. You can pick up the grits separator in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

2003 Meadows Mills 30 Inch Centennial Stone Burr Mill

$10,500

For sale, one (1) factory reconditioned 30 inch stone burr mill, side discharge. This stone burr mill is belt driven by a 25 HP 3 phase 60 hertz electric motor and includes the belt drive with belt guard. Magnetic motor starter available for additional cost. You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

Meadows Mills Number 20

$2,400

For sale, one (1) CS Bell number 20 “Modern” hammer mill. Great for engine enthusiasts looking for something to drive with their antique engine. Expertly cleaned and painted. A great piece selling for $2,400.00. You can pick up the hammer mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call Brian Hege at 336-927-4663.